Description: Brake booster hose kit (with re-pro spring clamps)
Year: 1969-70
Model: Mustang
Engine: BOSS 429
Hose Length: 19.25-19.5 inches
Spring Clamps: 2 (reproductions)
Date Code: none (this hose is not date coded)

Jack's Comments:

This hose is the only type of hose Kar Kraft installed on all 1969-1970 BOSS 429's according to Ed Meyer and our research. For whatever reason the Kar Kraft assembly line only used this hose. Both years used the same length hose even though the intake vacuum nipple changed a little in 1970. This hose is also correct for the first 50 BOSS 429's made in 1969 (Ed Meyer).

Concours Notes:
The repro clamps provided are just like the originals but the tong ends are shorter and more rounded so you don't remove your knuckles when working on your car. If you have your original knuckle buster clamps paint them semi-flat black and reuse them.

Disclaimer: Dead Nuts On, LLC is not liable for any bodily injury or death resulting from improper installation of our brake booster hose kits, which includes ANY deviation from factory Ford assembly manuals. Adding any hardware, making any modifications of the brake booster hose kit provided exempts Dead Nuts On, LLC from all liability in the case of accident, injury, or death as it has no control over the use, misuse, or alteration of the brake booster hose kit after they leave our possession. Receipt and acceptance of this product confirms acceptance of this disclaimer.