![1969-70 Convertible Trunk Divider & Well Liner Hardware Kit](https://cdn11.bigcommerce.com/s-q45wq/images/stencil/800x800/products/490/1512/1969_Mustang_Convertible_Well_Liner_Hardware_Kit__04991.1480526213.png?c=2)
SPECIAL LIMITED OFFER: Board only, no well liner, not painted.
Description: Convertible Trunk Divider Board (black)
Year: 1969-70
Model: Mustang, Shelby, Cougar
Divider: Black semi-gloss finish (you will need to paint this yourself)
Well Liner: Black vinyl (not included)
Jack's Comments:
All Mustang, Shelby, Cougar convertibles used this trunk divider board and well liner combination in 1969 and 1970. Unlike the 67-68 trunk divider that screwed to the trunk floor the 69-70 version was stitched to the bottom of the well liner. Held in position by the stitching on the bottom and gravity resting the top of the divider on the trunk lid hinge spring, it was a good clean looking fit. The relief on the bottom was there so you could swing the divider forward to have access to the pump and possibly to gain you a tad more trunk room when the top was up.
Product Details:
We can no longer get the brown board material but we can get the same thickness in a black board. You will receive just the board cut to the correct dimensions with the horizontal pressed seam and three sewing guide holes as shown in the pictures. You will have to paint the board on the side facing the trunk and get a well liner sewn to the board as seen in the pictures below.
Suggested Well Liner:
The well liner we used in the past is the Distinctive Industries well liner (shown in pictures below)
Hardware:
Install mounting hardware is not included but is available.