Description: Power Steering Low Pressure Cooler Hose & Clamps
Year: 1967
Model: Shelby
Model Options: Power steering oil cooler
Engine: 289 Hipo, 427, 428
Manufacture: Dead Nuts On Reproductions
Quantity: 1 x 58 inch hose, 4 crimp clamps

Accuracy Rating: 8
Best Repro Available: YES

Jack's Comments:

The 1967 Shelby was equipped with a remote power steering oil cooler that used plain black hoses without any ink stamping and was secured with crimp clamps. Our reproduction hose has almost the same exact outside diameter as factory originals so you can use the correct size crimp clamp. It also has the same smooth outer wall as the originals vs the heavy pattern found on most auto parts store hoses.

Correct lengths for the hoses are 21 3/4" for the short hose and 35 1/2" for the long hose (source Jeff Yergovich, measurements taken from original take-offs). You will receive a single 58 inch hose you will need to cut to size.

Concours Notes:
1) The clamps provided are made of stainless steel so the finish is not exactly the same as the originals with a zinc finish. Clamps will require a crimping tool to crimp properly.
2) Some pictures and info found at the Concours Mustang Forum